TPU film matte technology is becoming increasingly important in high-performance film manufacturing, where both aesthetic appearance and processing stability are required. Traditional matte solutions often rely on surface coatings or mineral fillers, which may lead to migration, inconsistent gloss levels, or reduced long-term durability.
SILIKE silicone modified TPU particle technology provides a structural approach to TPU film surface modification, enabling stable matte finish, improved anti-blocking performance, and reliable extrusion behavior without compromising material flexibility.
SILIKE has highlighted its Soft Modified TPU Particle 3135 as an advanced material solution designed to enable stable matte surface control, improved processing stability, and enhanced tactile performance in TPU film systems. The technology responds to increasing industry demand for premium surface aesthetics and reliable large-scale TPU film production.
As TPU films continue to expand across packaging, automotive interiors, consumer electronics, and flexible functional materials, manufacturers are facing growing pressure to balance optical appearance, processing efficiency, and long-term surface stability. According to recent industry reporting, TPU films are increasingly used in applications such as automotive interior components, acoustic systems, and flexible functional laminates due to their durability and design adaptability. (Source: Thermoplastic Polyurethane Films Market 2026 - 2033)
At the same time, new developments in TPU film technologies—particularly in printed electronics and automotive haptics—are accelerating demand for materials that deliver both functional performance and consistent surface aesthetics. Recent collaborations in the automotive sector highlight TPU films as key substrates for next-generation flexible interior systems integrating sensing, touch control, and adaptive interfaces. (Source Covestro, Genofort target automotive haptics with TPU film technology)
SILIKE’s Soft Modified TPU Particle 3135 adopts a structural modification approach based on silicone elastomer dispersion within a TPU-compatible polyester carrier system. Instead of relying on surface coatings, external fillers, or migrating slip agents, the technology modifies the internal micro-phase structure of TPU during processing.
This structural design enables controlled light scattering within the material matrix, resulting in a stable matte appearance that is intrinsic to the TPU film rather than applied externally. The system is designed to maintain surface consistency during continuous extrusion and roll-to-roll processing.
According to SILIKE’s product design framework, Soft Modified TPU Particle 3135 is engineered to deliver:
The material is supplied in pellet form and designed for direct incorporation into TPU processing workflows without the need for additional surface treatment steps.
Traditional matte TPU film solutions often rely on mineral fillers, coatings, or external additives. However, these approaches can introduce trade-offs such as surface degradation, inconsistent gloss levels, or additive migration over time.
In contrast, structural modification technologies are gaining attention as the industry shifts toward long-term performance stability and scalable manufacturing efficiency. Recent technical discussions in polymer processing highlight that TPU film surface quality is increasingly dependent on formulation-level control rather than post-processing treatments.
To evaluate the performance of Soft Modified TPU Particle 3135 in TPU film applications, SILIKE conducted a comparative film extrusion test using a standard formulation. In the evaluation, 10% of 3135 was uniformly blended with polyester TPU, followed by direct casting to produce a 10-micron TPU film. The resulting samples were then analyzed for key optical and surface performance indicators, including haze, light transmittance, and surface gloss, and compared against a conventional matte TPU material.
The results demonstrate that the incorporation of 3135 effectively modifies the internal micro-phase structure of TPU, enabling a more controlled light scattering behavior that contributes to a stable matte surface appearance. At the same time, the material maintains good processing compatibility in standard melt blending and extrusion systems without requiring additional granulation steps. According to SILIKE’s technical data, the product is designed with a Shore A hardness of 85 and a polyester TPU carrier system, supporting balanced mechanical integrity while enhancing surface aesthetics and anti-blocking performance. These results confirm its suitability for high-consistency TPU film production where both visual uniformity and processing stability are critical.
SILIKE is a materials technology company specializing in silicone-based polymer modification systems, including functional masterbatches and elastomeric additives designed to improve processing performance, surface quality, and durability across TPU, plastics, and engineered polymer systems.
Soft Modified TPU Particle 3135 represents a significant step forward in TPU film surface engineering by integrating matte appearance control, soft-touch enhancement, and non-migrating structural stability within a single material system. By shifting from traditional surface treatments to internal micro-phase design, SILIKE provides manufacturers with a more consistent and scalable approach to achieving premium TPU film aesthetics. As demand continues to grow for high-performance, visually refined, and process-stable TPU films across automotive, packaging, and consumer applications, this technology offers a practical pathway toward more reliable and design-driven material solutions in advanced polymer processing.
SILIKE Silicone Materials Team
Website: https://www.si-tpv.com/
Email: sale@reytechmachine.com
Inquiry: Available via official website contact form
„Thanks to the LUVIR technology, the solder resist process could be switched directly from the previously used mask exposure to direct exposure. As an outstanding digital solution on the market, this technology has been able to demonstrate fast process times and superior quality on our certified conventional ink in production. This allowed us to fully digitize the solder mask process at low cost – without process or ink adjustments. An excellent benefit to our production in Rot am See.“
Ralf Göhringer (Head of Production WE Rot am See)
I would definitely recommend the Limata machine and team for a future company purchase
Michael Greenaway
Compunetics Inc.
“The Limata ldi has been amazing!! Best thing we did was buy this machine”
Richard Brady
GM
Circuitlabs
“Since 2019, we have been running the Limata X1000 LDI system (including LUVIR for solder mask imaging) in daily production as an addition to our current process with film. The machine was capable of properly exposing Taiyo PSR-4000 BN (DI) solder mask types on normal to high-copper boards using a new and unique direct imaging process. The machine operating interface is very user friendly which allowed for a quick technical training curve. The pre-registration processing reduced several seconds of production time at every print. Limata support and service staff is incomparable. They supported our team every step of the way at basically any time of the day or night, with literally, an immediate response time, customizing the software interface to best fit our Operations and needs.
We have exposed more than 8,000 prints since end of October, on various solder mask colors and some resist film panels. Limata, has proven to be very capable and innovative. They are a strong contender in the industry.
We have very much enjoyed this project, and working with the team!
Thank you Limata for the continued support and being a part of our growth.”
Bill Sezate
Vice President, GM
Summit Interconnect
As a replacement to our current contact exposure process with film, the LIMATA X2000 system including LUVIR-Technology was capable of properly exposing non-LDI solder mask types using a direct imaging process. The machine offers cutting edge software with a very intuitive operating interface which allowed for quick technician training curve. The dual drawer system combined with pre-registration processing reduced several seconds of production time at every machine cycle. Limata support and service staff is world class. They added software patches to keep production running at shortest possible response times, customized the software interface to best fit our in-house Operations system, and even wrote a step-by-step machine processing manual. As a result of the project, we have exposed more than 16,000 times on various product types and solder mask brands/colors. Limata, in a very short timeframe as a company, has definitely shown they are truly innovative and will be challenging the industry of direct imaging for the top spot.
Kevin Beattie
Process Engineer
TTM Technologies
Forest Grove Division
